OUR PRODUCTS
CNG Booster Compressor
We provide Air cooled and Water cooled based Hydraulic booster packages with design and detailed engineering. We have supplied & commissioned more than 100 CNG Booster compressor packages to all over CGD networks in India.
• HMI & PLC Based System Integration.
• All OEM Spare parts for Compressors.
• With overhead provision for CNG storage system of 4500 / 3000 WLC.
• The all equipment are interconnected and mounted on a single base.
• Hydraulic oil capacity- 330 or 440 liters.
• Noise level – 1-meter distance – 75+ 3 dbA.
• Hydraulic oil filtering; 20 microns – intake gas filtering; 0.01 microns.
• All Pressure Components 100 % Hydro tested at above 1.5 times of MAWP.
• Filter cartridge is made up of borosilicate micro glass fiber with filtration particle
of 0.01 micron
• Air Compressor & Dryer System
• 5 stage Power Factor Controller System
• Co2 flooding system Compliance with NFPA-12, GSR-2016 & SMPV Rules.
• Flow capacity Range from 250 SCMH to 550 SCMH
CNG Cascades
• Designed, Detail Engineering and manufactured to the highest international
standards. CNG Storage Cascade is manufactured to the latest PESO
(GSR-2016) & OISD-179 Norms.
• All material used in the CNG Storage Cascade is of the highest interconnected
tubing’s, Valves and fittings are used of SS-316
• All CNG cylinders (CR-MO) used for Manufacturing of CNG Storage Cascade
only as per IS 7285 Part II Standard code which is approved by the Chief
Controller of Explosives
• Each cylinder equipped with cylinder shut-off valve and Combination
Fusible Plug (Conforming to IS 3224:2002)
• Pressure, Temperature (Contact type / Non contact) on each bank (Low,
Medium, and High) for Stationary Cascade as required
• Cascade structure is capable of withstand 4G-Static Load Analysis from
any direction without any permanent distortion
CNG Dispensers
Gasorex SR Energy Pvt Ltd offers a wide variety of CNG Dispensers adhered to customer specifications. Gasorex India is responsible for design, detail, engineering, inspection and testing of CNG Dispensers with complete packaged items and model Approved by CCOE.
• Maximum Allowable working pressure (MAWP) is 5000 psig
• Electrical ratings 220V AC, 50 HZ, Class I, Div. I, Gas group D
• Complete CNG Dispensers compliance with NFPA 52, ISO 16923, AGA & NGV 4.2
standards
• Complete CNG dispensers SS304/SS316 Body with Compact size
• High pressure Coalescing filter gas filters for each banking system with Differential
pressure gauge for low oil carryover from booster compressors
• Solenoid valves are compliant with the Pressure Equipment Directive (PED 2014
/68/EU) and the explosion protectoon directive (ATEX 2014/34/EU)
• Electrically conductive CNG hoses are designed to meet the rigorous requirements
of high pressure CNG applications as per NFPA52/ ANSI/CSA NGV4.2/3.1
• Dispenser LCD Enclosure panel approved with IP54/65 from KLPL certified lab
• Dispenser Electronics power supply, Mother board, keypad & Display card
complies as per IS/IEC 60079-11 & IS/IEC 60079-1 certified from KLPL lab
LCV Posts
• Design, detail engineering, inspection and testing along with complete erection,
installation and commissioning of LCV fill post at daughter & mother CNG stations
• LCV filling hose (electrically conductive) with breakaway & quick release coupling
• ½” ID LCV filling hose with be of minimum 4.5 mtr long and have ½’’ NPTF quick
release coupling (QRC) connected
• Hose crimping with SS304/SS316 as per customer requirements
• Filling post to be supplied with 4” pressure gauge for pressure monitoring of CNG & other instrumentation with Block and bleed valve arrangements
• As per OISD-179 & PESO guidelines vent height maintained with at least 3.5
meters from ground level and for operation and vent of LCV post shall be up to a
maximum height of 1.8 meters
• LCV Filling/Decanting post equipped with CNG50 coriolis mass flow meter
(Emerson / E&H Make) as per CGD entities Demands
• CV post panel with high compression rubber guards for rain and dust protections
robust painted galvanized iron frame / MS frame with paint of minimum
thickness of 150/300 Micron
• Hose conductivity test & hydro-pneumatic test of complete hose assembly as
per authorized OEM recommendation
Why Gasorex India
We are committed to providing innovative and sustainable solutions for the compressed natural gas industry.
Our expertise, cutting-edge technology, and dedication to excellence makes us the preferred choice for businesses seeking reliable CNG equipment.
We also provide with in- house testing facilities. We are equipped with in-house nitrogen PSA generator, air compressor for nitrogen compression, nitrogen pressure booster in order to pressure gas up to 250 bar (g), and a lot more.